MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Need help with "new" meter . . .
View previous topic :: View next topic  


Reply

Got my minolta auto meter professional, looks good and it works, but I've got a couple question that you may or may not be able top help me with. . .
1 - (probably a dumb one, but . . .) If I'm comparing the reading from this meter to my camer with its TTL metering is it incident or reflected light I'm measuring?

2- The meter was missing its spherical diffuser - can parts be gotten? If not do you think 1/2 a ping pong ball would work Confused Since this meter is built to take accessories like a view finder for reflect light readings I was thinking it might not be an issue when taking reflected light readings.

Thanks in advance, as always,
Jim


Reply

j.lukow wrote:

1 - (probably a dumb one, but . . .) If I'm comparing the reading from this meter to my camer with its TTL metering is it incident or reflected light I'm measuring?

2- The meter was missing its spherical diffuser - can parts be gotten? If not do you think 1/2 a ping pong ball would work Confused


Cameras meter reflected light (well, unless you stick on one of these incident light lens caps and direct them the other way).

Minolta used one standard bayonet accessory mount throughout most of its meters. My Autometer II has the same mount as my Flashmeter IV and the current Autometer IVf (which is now made by Kenko/Tokina) - so there still are accessories available new for these. But some earlier meters use different (usually bigger) spheres, and the latest Flashmeter VI uses smaller ones.

Personally I'd stay clear of ping-pong balls - the point of a meter is more accuracy, and that will be lost if you use a diffuser with unknown spectral characteristics and no calibration.

Sevo