MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Wide angle Tilt on Canon 1D
View previous topic :: View next topic  


Reply

I do a lot of people photography using a Canon 1D camera, especially groups and crowds. I have a problem pf getting the front and back of the group or crowd in focus especially in small places

I've been looking at the expensive Canon 24mm tilt and shift lenses as a solution to my problem.
After visiting this forum I realize that there are more options available. Such as getting a Hertblei tilt adapter plus a compatable wide angle lens.

I currently use a 24-105 4. Canon zoom lens for most of my shots.

I see that a company called Zork do a Tilt attachment.

Should I just go for a Canon 24 TS- lens or can I do better?

What do you think? Will the above solve my problem?

Many thanks


Reply

Very hardly. Professional corporate group photography is usually executed with view cameras because of the better resolution of 4x5 film (better than any digital sensor so far) and use of advanced tilt-shifts movements.


Reply

I've been doing a lot of research on tilt and will tell you this; Hartblei tilt adapter will not work because the widest angle you can put on it is a 45mm (e.g., Mir-26B), which is a super wide angle on a medium format body, but a normal on FF, and medium tele on anything smaller, including your 1D.

The cheaper alternatives are dicont'd Hartblei 35/2,8 and Arsat/Arax/Photec/BIG/etc., 35/2,8. Again on anything smaller than a FF, you're talking normal lens range.

Same thing should apply to the Zork adapters, because you have to use a medium format lens, and the widest you're going to get is 45mm, unless you can deal with barrel distortion (which, admittedly, can be fixed somewhat in postprocessing) and go for a medium format fisheye like Arsat 30mm (Zodiak) or Distagon.


So, bottom line, if you want to stick to your 1D, and wide angle is important, spend the extra dough, and get the Canon TS-E 24. You just can't beat it with any other option *on a 135 system*.


If you're serious about things, you could move up to medium format and get a 45mm T/S; Hartblei's 45/3,5 would be awesome if you could find one. Zork adapters, while it'll end up being more expensive, will give you much more flexibility (20mm shift and 25˚ tilt!!!??? HOLY COW).


Or, you can forget digital and go large format Wink


Reply

Hey hey hey.


Looks like you came into the market at EXACTLY the right time. This released just moments ago:

http://www.dpreview.com/news/0902/09021806canon17mm24mmTSElenses.asp


Reply

rawhead wrote:
http://www.dpreview.com/news/0902/09021806canon17mm24mmTSElenses.asp


First time, a 17mm TSE lens. Looks interesting.


Reply

Thanks for the news of the new Canon lenses.

I rented a Canon 24 TS-E tilt & shift lens. What can I say, the lens was good enough but the Tilt. What tilt? I couldn't get the tilt to do more, then stepping down to f8 would have done.

Basically Tilt was a waste of time. My guess is that most people use this lens for the Shift bit.

I enjoyed using the Shift to photograph rooms then merging them in Photoshop to create acceptable panoramas

I did have a 10 minute look at to Canon 90 TS-E lens. Now, this lens does have a fair amount of Tilt that I can see myself using for product shots. This lens looks promising as a Tilt lens, but I feel that in spite of how good it is, it is still a cut down version of what a Tilt lens should be able to do.

Is there something better to work with a DSLR?

mike


Reply

I can't imagine the tilt on a DSLR t/s lens being any use for crowds. The angles have to be very precise to place the plane of focus exactly where you want it. I sometime use my Harblei t/s for stock shots and it is necessary to be at about a 40 degree angle above the table with maximum tilt to lay the focal plane across the table top. Unless you are significantly above your crowd and using a tripod to fix the angle I doubt if the tilt will have much benefit.


Reply

I agree with PaulC.

If the 8 deg. tilt of the TS-E 24mm didn't cut it for the way you shoot, then nothing on a 135 system is going to satisfy you, not to mention the TS-E 17mm which will only have 6.5 deg.

If you shoot in an environment (relatively confined, and where you cannot be high above the crowd), then you will need radical tilt, so I think the only viable option, if you want to shoot digital, is to go digital MF and use the Zork adapters. Man, I'd be really envious of such a setup Wink))


Reply

Mike, it really depends on which results you want to achieve in your crowd shots.

As I said above if yours are commercial shots most of the time you have to avoid the distorted perspective of a wide angle, people at the borders look ugly, and you probably need huge resolution for printing large size posters.

That's the reason why corporate photographers use view cameras, the most advanced with a digital back nowadays, in medium format the only viable solution is the new Hassy with the incredible tilt-shift 50 lens, but still I'd prefer a view camera for the more movements it allows and with a normal lens to have correct perspective.

If instead your project is just for fun or with an artistic goal you can have more freedom in the choice of your instruments, but still to get the above results there's no way round.