| View previous topic :: View next topic |
| Author |
Message |
hk300
 Joined: 30 Oct 2008 Posts: 1041 Location: Hong Kong
|
 Posted: Mon Jan 12, 2009 1:23 am Post subject: M42 to PK adapters ... which ones are the best? |
|
 Posted: Mon Jan 12, 2009 1:23 am Post subject: M42 to PK adapters ... which ones are the best? |
|
|
hk300 wrote:
Of coz ... the genuine Pentax M42 to PK mount is likely the best.
It sells for $31 at the Pentax Webstore
http://www.pentaxwebstore.com/detail/PTX+30120
 _________________ No longer member , please don't try to contact to him |
|
| Back to top |
|
 |
hk300
 Joined: 30 Oct 2008 Posts: 1041 Location: Hong Kong
|
 Posted: Mon Jan 12, 2009 1:31 am Post subject: |
|
 Posted: Mon Jan 12, 2009 1:31 am Post subject: |
|
|
hk300 wrote:
I found Hin's Tech Corner http://techtheman.blogspot.com/2008/05/genuine-pentax-m42-to-k-adapter.html
who has a lot of information on adapters. _________________ No longer member , please don't try to contact to him |
|
| Back to top |
|
 |
hk300
 Joined: 30 Oct 2008 Posts: 1041 Location: Hong Kong
|
|
| Back to top |
|
 |
indianadinos
 Joined: 06 Jul 2008 Posts: 1310 Location: Toulouse, France
Expire: 2011-12-05
|
 Posted: Fri Jan 16, 2009 11:45 pm Post subject: |
|
 Posted: Fri Jan 16, 2009 11:45 pm Post subject: |
|
|
indianadinos wrote:
Hello Alex,
I have the original Pentax adapter, and both the adapters #2 and #5 (both from Roxsen).
The #2 doesn't allow infinity focusing, but it is really useful when you are converting a lens (kind of an old Nikkor) to a Pentax-K mount, since the flange allows holes for screwing the adapter on the lens barrel instead of the original mount ...
The #5, which is effectively the same as #1, fully mounts inside the camera body, thus allowing for infinity focus ... Harder to remove from the body than the original Pentax-K adapter, it has a "little" fault: it is made of some chromed metal, and with use there will be some little specks of the chrome covering that will fall from the adapter, eventually in the camera body ...
The original Pentax-K adapter is the best one i have found until now ... I think it is made by aluminium, or something like that, but in no way it's chromed, so there will be no metallic dust that will fall in the body of your camera if you switch lenses a lot ... Moreover, it is really easy to remove, a nail is enough, no need for a tool as for the third party adapter ...
So, definitively, the Pentax branded one is the only one that is worth the money ... If only they were a bit cheaper ...
Best regards _________________ Please visit my blogs Shooting with a Pentax K10D / FF Visions
Takumar: 24/3.5, 28/3.5, 35/2, 35/3.5, 50/1.4, 55/1.8, 85/1.8, 105/2.8, 120/2.8, 135/3.5, 150/4, 200/4
Pentax-K: M28/2.8, K28/3.5, M50/1.4, A50/1.7, M50/4 Macro, K85/1.8, K105/2.8, K135/2.5, M200/4, M70-150/4
Zeiss: Flektogon 20/2.8, 20/4, 35/2.4, 35/2.8, Tessar 50/2.8, Pancolar 50/1.8, Biotar 58/2, Sonnar 135/3.5, Sonnar 180/2.8
Meyer: Primagon 35/4.5, Domiplan 50/2.8, Oreston 50/1.8, Primoplan 58/1.9, Trioplan 100/2.8, Orestor 100/2.8, Orestor 135/2.8
Schacht/Steinheil: Travenar 90/2.8, Travenon 135/4.5, Quinar 135/2.8, Quinar 135/3.5
Russian: MIR 37B, Industar 50/3.5, Helios 44M & 44M-2, Jupiter 37A
P6: Flektogon 50/4, Biometar 80/2.8, Orestor 300/4
Nikkor: Nikkor-O 35/2, Micro 55/3.5, Nikkor-S 50/1.4, Nikkor-Q 135/2.8
Fuji: EBC 28/3.5, EBC 55/3.5 Macro, EBC 135/2.5
Misc Lenses: Kiron 105/2.8 Macro, Tamron SP90/2.5
... and a few other Vivitar, Tamron, Sigma and Soligor lenses ...
|
|
| Back to top |
|
 |
ryan s
 Joined: 26 Sep 2008 Posts: 384 Location: Madison, WI
|
 Posted: Sat Jan 17, 2009 6:31 am Post subject: |
|
 Posted: Sat Jan 17, 2009 6:31 am Post subject: |
|
|
ryan s wrote:
I had one similar to 4 and 5 in the Bower brand. It was hard to remove without the wrench and the spring didn't feel as "flexible" as the Pentax one.
You know how some metal feels brittle if you bend it too much? This is my impression of the cheap adapters.
As with everything, I always say OEM > China. The Pentax one is the only one  _________________ Pentax Bodies: K10D + D-BG2 | MX |
M: Zenitar 16/2.8 | 28/2.8 | 50/1.7 | M39: Mir-1 GP 37/2.8 M42: Vivitar 28/2.5 AD2: Tamron SP Macro 90/2.5 |
|
| Back to top |
|
 |
peterqd
 Joined: 28 Feb 2007 Posts: 7449 Location: near High Wycombe, UK
Expire: 2014-01-04
|
 Posted: Sat Jan 17, 2009 7:54 am Post subject: |
|
 Posted: Sat Jan 17, 2009 7:54 am Post subject: |
|
|
peterqd wrote:
I always use the original Pentax adapter now. One day when I was using a Roxsen one (like No. 5) I was focussing the Jupiter-9 with quite stiff focussing dial, and the lens fell out of the camera and luckily I just caught it before it hit the concrete. The spring clip that secures the adapter did not lock properly. I trashed the adapter straight away. _________________ Peter - Moderator |
|
| Back to top |
|
 |
shoey
Joined: 15 Feb 2009 Posts: 11
|
 Posted: Sun Feb 15, 2009 3:00 pm Post subject: |
|
 Posted: Sun Feb 15, 2009 3:00 pm Post subject: |
|
|
shoey wrote:
be VERY careful with the likes of adapter 4. It ruined my MX body that way.
If you look closely at adpater #4, it has a tiny screw that holds some kind of metal shim. Its poorly put together and at one stage, after taking a picture, that screw bounced off (by the movement of the mirror?) and wedged itself on my shutter. next film wind, torn shutter cloth
nowadays when i buy a m42 -> k mount adapter i always get rid of that tiny screw/ shim |
|
| Back to top |
|
 |
luisalegria
 Joined: 07 Mar 2008 Posts: 6602 Location: San Francisco, USA
Expire: 2018-01-18
|
 Posted: Sun Feb 15, 2009 6:05 pm Post subject: |
|
 Posted: Sun Feb 15, 2009 6:05 pm Post subject: |
|
|
luisalegria wrote:
I have the Pentax adapters (4 of them so far), and I find them very durable and reliable. They seem to be made of chromed brass, and thats good quality chrome that doesn't flake off or rub off easily.
I like the Type 3 for conversion work as it is also solid chrome brass. Its also good on some long teles that have a little "extra" for infinity focus, as its much more convenient to use this type than to screw them into the Pentax adapters. It really turns them into PK. Of course, only a few lenses can use this.
I have also some black aluminum adapters, which are more cheaply made. These can also be useful for conversion, but beware - one of these I had did not fit the K100D PK mount as the gap between the flange and the lugs was too narrow. You can fix this by bending the lugs a little, but thats also an indication that these things are not strong or durable. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Back to top |
|
 |
Jieffe
 Joined: 04 Nov 2007 Posts: 754 Location: Belgium
|
 Posted: Sun Feb 15, 2009 7:21 pm Post subject: |
|
 Posted: Sun Feb 15, 2009 7:21 pm Post subject: |
|
|
Jieffe wrote:
The #1 sold by Roxen has improved in quality lastly. The first I bought had to be sanded to reduce the height (compared to the genuine adapter). The last ones seems correct. Regarding the locking pin, I prefer to remove it and leave an adapter on each lens. |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|