MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Tripod upgrade - a good choice?
View previous topic :: View next topic  


Reply

I've decided that with my tax refund this year, I will upgrade from my Bogen/Manfrotto 725B. It's a good tripod, but it doesn't seem able to handle the weight of heavy lenses so well.

I've been eyeing the Manfrotto 055XPROB legs, with either the 486RC2 or 488RC2 ballheads. I'm not set on the legs, but I would like to keep cost to around $250 US. I will stay with the Manfrotto RC2-series head, however. This will offer me a third quick-release plate, also allowing me to still be able to use the 725B whenever I wish. I don't have any interest in a pan/tilt head; I simply like the ballhead too much to switch.

As a combination, I can get the legs with the 486 head for US $215, or with the 488 head for US $245. All are offered with free shipping, separately or in combination.

I like the differing angle locks offered on the legs, the fact that it can go flat, and the horizontal center column feature. I also like the height it offers, maximum, with the center column not extended. The best price I've recently found for the legs is US $144.

So after the long-winded introduction, Embarassed here are my questions:

1) Are there better or similar leg sets to consider for around the same cost? If so, why would you recommend them?

2) Are there other heads to consider which use the same RC2 quick-release system?

3) Of the 486 and 488 heads, I am yet unable to determine if they both offer a separate lock/adjustment for pan action. I believe the 486 does not have this function while the 488 does, but I have been unable to confirm this. What are the differences between these two heads? They are both rated for the same weight capacity, yet are offered at a US $30 difference in price. I can certainly live without panning, so a savings of $30 would be worth the difference.

4) Are my initial choices above solid ones? I have reasons to believe they are, but if anyone cares to explain why I might be making poor choices, please let me know.

It'll be 2 to 4 weeks before I get my tax refund, so I'll thank everyone in advance for any information or opinions you'd care to share with me.



Regards,


Reply

Good choice. I have the Manfrotto 714SHB as a small go anywhere tripod and the 055 with 486 head as my main tool.
I find the little 714 can handle virtually anything but it lacks the height. Not sure but I think the 725B was the latter model with the plastic head? Thats its weak spot.
You will not need a bigger head than the 486, IMO it's the best value for money and could hold a house. It manages my Fuji 400mm which is 2+ kilo. As you point it it does spread almost flat, those legs are very handy for quick adjustments to height and leveling the tripod.
Buy it and it will last you a lifetime, don't be tempted by anything cheaper.
If I had a big tax refund I would be tempted by Carbon fibre legs, your budget may only be $50 short?


Reply

I'll also recommend the 055XPROB - I've been using one for quite a while now and love it. Mine is used with the 468MGRC2 hydrostatic ball-head which - whilst expensive - offers more convenience for quick movement when I'm out and about..

The main thing that sold me on the 055 is the sturdiness offered by its relatively light weight - it'll take the 5D with grip and 70-200 2.8 without any problem. In the past I've also had a Hasselblad H3D-II with 50-110 lens on this combo and it stood up to that insane weight.

I also use a 028B with 804RC4 head but only indoors as it weights a ton!!!


Reply

http://www.amvona.com/?page=shop/category&category_id=caf9a598a7188e9e318b66d5d8831a53

Take a look , Alex can give you huge discount I hope compare with Manfrotto prices, perhaps a good alternative.


Reply

I have an Amvona Dytran AT-858B tripod & for what I paid, it has more than met my needs & I've had it for over 2 years now. I use it with a TrioPo JB-1 ballhead that has the acra-swiss style QR plate.. I do have a Manfrotto 681B monopod however.


Reply

I´ve got 055XPROB with 488RC2 ball head. 488 has a panning base and lock, 486 hasn´t. I´d say that for long lenses, a 488 would be a safer bet.
I have read, that the recommendation for ball heads is to have at least three times the load capacity for your heaviest camera-lens combination in order to have smooth operation, if you for example want to follow a moving object with a long lens.

Manfrotto ball heads are strong and relatively cheap, but I have found, that with my 488 it´s almost impossible to find the "sweet spot", the friction setting where you can still move your gear under pressure, but it will stay put, won't creep at any angle, without having to touch the controls at all, yet retaining smoothness.


Reply

Screamin Scott wrote:
I have an Amvona Dytran AT-858B tripod & for what I paid, it has more than met my needs & I've had it for over 2 years now. I use it with a TrioPo JB-1 ballhead that has the acra-swiss style QR plate.. I do have a Manfrotto 681B monopod however.


Thank you Scott! This was very important feedback for me, because we planning to sell under mflenses brand Amvona tripods and I know nothing about their longer term quality.


Reply

Rob Leslie wrote:
Not sure but I think the 725B was the latter model with the plastic head?
No, it's an all-metal head.
Rob Leslie wrote:
I would be tempted by Carbon fibre legs, your budget may only be $50 short?
Yes I am tempted, but I find that with features vs. cost, the carbon legsets are still very expensive.

Attila wrote:
http://www.amvona.com/?page=shop/category&category_id=caf9a598a7188e9e318b66d5d8831a53

Take a look , Alex can give you huge discount I hope compare with Manfrotto prices, perhaps a good alternative.
I've heard good reviews of Amvona before, and I just now had a look at the products listed on their website. While the prices are very attractive, I did not find a legset with all of the features the 055XPROB set offers.

Gurdie wrote:
488 has a panning base and lock, 486 hasn´t. I´d say that for long lenses, a 488 would be a safer bet.
Ah, thank you for clearing up the difference. I am actually leaning towards the 488 head, anyway.


*edited because I hit the 'submit' button early. Sad *


Reply

I did not mention this before as I thought it may just be the examples I tried but now somebody else has I will.
I found that finding the 'Sweet spot on the 488 not so easy as the 486. It may be something to do with having two separate lock/adjustment but I don't know.
Also the 055 will pan anyway on its centre column (Two sections) Using the one section to pan does however reduce the max height to around six foot! No need for the step ladder then!


Reply

are there some Manfrotto specs you like?

e.g.
the clips release
the ability to take out the center column and turn it 90 degrees for MACRO photography

As Attila mentioned before, we are planning to get a line of MFLenses.com tripods and accesories, one of our suppliers also manufacturers the Amvona tripods (and some other brands). These will be excellent value!
Their higher end tripods are similar to Gitzo (with Gitzo release), but I also have a line of medium line Manfrotto style ones without the turnable center column.

I can also get some other brands, but pricing will be less attractive.


Reply



This is a standard ball head with common quick release plate.






The 'unique' part of this tripod is its ability to take out the center column and turn it 90 degrees. I have suppliers who have similar designs. But ... do you need it?


Reply

What is the after care service available on these?
Photographers expect to have a lifetime of use from a good tripod, they only change if something really better comes along (Like Carbon fibre) I know those who stil use their original Art Manfrotto tripods and the reassurance of excellent after care service and easily found spares is important.
I recently wanted new feet for my 12 year old 055 and they arrived at the shop the next day, no charge.
Do these tripods have dealer support?


Reply

hk300 wrote:

The 'unique' part of this tripod is its ability to take out the center column and turn it 90 degrees. I have suppliers who have similar designs. But ... do you need it?
No, I do not need this. But I want this. Wink

If you and your suppliers can offer a legset with all the features of the 055XPROB legs, for a similar price, I will be very interested. Scott's endorsement of his own tripod tells me there is no reason to be concerned with quality, but I just don't see the same or similar adjustment features offered. Rather than purchasing a tripod to do nothing more than provide improved weight handling, I like the idea of a tripod that is capable of other adjustments. Finding creative uses for those adjustments might prove to be fun, as well.


Reply

Well, I did it. Shocked

I placed my purchase order for the 055XPROB legset, a 488RC2 ballhead, and an additional RC2 quick-release plate. The legset is currently out of stock, and the vendor is waiting on replenished stock before shipping any of it to me.

I'm now playing the waiting game until it arrives. Confused



I offer my thanks to everyone who was kind enough to take a few moments to provide their opinions and advice. I did have my doubts a few times during the decision process, but I'm confident that I chose an excellent product for my intended budget. Thank you all. Smile