| View previous topic :: View next topic |
| Author |
Message |
Kaj
Joined: 03 Feb 2009 Posts: 21
|
 Posted: Tue Feb 03, 2009 4:25 am Post subject: Looking for a Pentacon (Meyers..) 300mm F4 lens mount for P6 |
|
 Posted: Tue Feb 03, 2009 4:25 am Post subject: Looking for a Pentacon (Meyers..) 300mm F4 lens mount for P6 |
|
|
Kaj wrote:
Hello everyone, I joined to ask this question...
I have one of the 300mm f4.5 Pentacon (Meyer Orestegor 300mm F4) teles with the M42 mount and I'd like to use it on my Pentax K200D. Now, I know I can get it to work with an M42-K adapter, but I have to press the manual stop-down button. Since I want to use this on a gunstock mount with electronic trigger, I'd have to use in in Aperture priority mode. The means that I'd have to ensure that the body contacts are shorted out.
Therefore, I'm looking for the Pentacon-Six mount for the 300mm f4, so I can use a P6 -> K mount adapter so I can rig it to short the contacts and have an easier to use, more secure connection to the camera body.
Does anyone have one of these mounts they could part with to help a guy out?
I have also posted in the thread where these lenses are discussed/shown: http://forum.mflenses.com/viewtopic,p,121289.html#121289 |
|
| Back to top |
|
 |
luisalegria
 Joined: 07 Mar 2008 Posts: 6602 Location: San Francisco, USA
Expire: 2018-01-18
|
 Posted: Tue Feb 03, 2009 7:42 pm Post subject: |
|
 Posted: Tue Feb 03, 2009 7:42 pm Post subject: |
|
|
luisalegria wrote:
Do you need to short out the contacts ?
I have been using both the flanged and original Pentax M42 adapters on a K100D and Av mode works just fine as far as I can tell, with Meyer 300/4.5 and 400/5.5.
That, or I have been screwing up for the last 13 months, which is certainly possible. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Back to top |
|
 |
Kaj
Joined: 03 Feb 2009 Posts: 21
|
 Posted: Tue Feb 03, 2009 9:10 pm Post subject: |
|
 Posted: Tue Feb 03, 2009 9:10 pm Post subject: |
|
|
Kaj wrote:
Yes, I need to short out the contacts so Aperture Priority mode will work properly (meter reads unpredictably otherwise...). Did you find any problems focusing to infinity on the 300mm f4 with the flanged variety of adapters? I know I can use the "Green Button" to do stop-down metering, but it means I cannot use my homebuilt electronic trigger grip.
Did the flanged adapters you used look like this?
Click here to see on Ebay |
|
| Back to top |
|
 |
luisalegria
 Joined: 07 Mar 2008 Posts: 6602 Location: San Francisco, USA
Expire: 2018-01-18
|
 Posted: Wed Feb 04, 2009 7:22 am Post subject: |
|
 Posted: Wed Feb 04, 2009 7:22 am Post subject: |
|
|
luisalegria wrote:
Hi Kaj,
Yes, they look like that. My Meyers are actually Exakta-mounts but I adapted these adapters to work, so as far as the shorting goes I have the same situation as you.
I have a different infinity focus problem than you do because of the Exakta mounts on mine. My 300/4.5 gets to 50m, but I adjusted infinity focus on the 400/5.5 so that one gets infinity. _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Back to top |
|
 |
Kaj
Joined: 03 Feb 2009 Posts: 21
|
 Posted: Thu Feb 05, 2009 12:51 am Post subject: |
|
 Posted: Thu Feb 05, 2009 12:51 am Post subject: |
|
|
Kaj wrote:
| luisalegria wrote: |
My 300/4.5 gets to 50m, but I adjusted infinity focus on the 400/5.5 so that one gets infinity. |
Any suggestions on how to get my Meyer 300 f/4.0 adjusted to infinity? |
|
| Back to top |
|
 |
luisalegria
 Joined: 07 Mar 2008 Posts: 6602 Location: San Francisco, USA
Expire: 2018-01-18
|
 Posted: Thu Feb 05, 2009 1:46 am Post subject: |
|
 Posted: Thu Feb 05, 2009 1:46 am Post subject: |
|
|
luisalegria wrote:
I haven't seen that one.
The Meyer 400 can be adjusted by just loosening the setscrews on the focus ring and rotating the ring 1/3 back from infinity. When you screw the setscrews back in you can turn it 1/3 turn more. Viola infinity.
You can't do that on the Meyer 300/4.5 _________________ I like Pentax DSLR's, Exaktas, M42 bodies of all kinds, strange and cheap Japanese lenses, and am dabbling in medium format/Speed Graphic work. |
|
| Back to top |
|
 |
Kaj
Joined: 03 Feb 2009 Posts: 21
|
 Posted: Mon Feb 09, 2009 5:47 am Post subject: |
|
 Posted: Mon Feb 09, 2009 5:47 am Post subject: |
|
|
Kaj wrote:
Well, since I've found it's impossible to shift the infinity focus backwards (to compensate for an adapter) I've decided to make to with a normal adapter for a while... and eventually I will use an adapter with the flange and have part of the rear lens mount machined down to make up for the difference in thickness. This way the lens will focus to infinity. It will still work on m42 bodies, but will focus slightly past infinity *shrug* oh well.... |
|
| Back to top |
|
 |
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|