MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Question for Nikon users - infinity focus
View previous topic :: View next topic  


Reply

Could anybody tell me, how far can be focused with standard Nikon->M42 adapter (without glass) and 135mm lens?

Thanks.


Reply

This will depend on the lens. I have found that using the M42 some lenses are not sharp when set to the infinity mark.
My method is to undo the tiny 'grub-screws' at the end of the lens when set to infinity and then focus on a distant power cable/tree and then set the lens back to infinity, tighten the screws and take the shot.
Look at the shot in review mode at 10 or 12x magnification and if it's not sharp... try again. It's a bit hit and miss but it is the only way I've found to do it.
Some older Nikkors were set in the factory to to focus 'over' the horizon, what lens are you using and are there any screws (three usually) near the front element?


Reply

I started with Nikon D50 + M42 adapter without glass 50mm lenses only for close up shoots, 85mm still to close for get nice portraits, 135mm is fine for portraits works like a 85mm lens, distance is enough for head and solders portrait.


Reply

I got a 135mm lens, which seems to have adjusted infinity focus. If focuses to infinity when set to 7 meters.

I think the lens could be adjusted by Nikon user to focus to infinity on Nikon body, but I'd like to verify that - thats why I ask for the distance.


Reply

I had no infinity with any lenses on D50, if you have it that lens is adjusted.


Reply

It's simply the thicknes of the adapter upsetting the rear element to film plane distance... I've corrected all my lenses myself as explained before.
Sorry, did I say FILM plane...