MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Cleaning Zeiss Planar 50mm
View previous topic :: View next topic  


Reply

{edit}


Hey,

I bought a Zeiss Contax Planar 50mm 1.7 on eBay, the optics are perfect, but the aperture mechanism has become a little sticky - it won't stop any further down than f5.6.

I can see oil on the back of the blades (facing the rear element), and am curious now as to how to remove the rear element...does it screw off once I've removed the mount and aperture click-ring?

If anyone has CLAed this lens, I'd greatly appreciate your advice Smile Smile

Thanks!!


Last edited by pbking on Sat Jun 13, 2015 4:20 pm; edited 4 times in total


Reply

Welcome!

This is first Planar what I heard with aperture problem Sad


Reply

This thread by the_Suede might help a little. It doesn't go as far as cleaning the aperture blades but maybe he can help you if you PM him.
http://forum.mflenses.com/c-y-planar-50-disassembly-and-conversion-t12014.html


Reply

Does everyone's aperture ring stop the lens down to F16 correctly, without the lens attached to the camera? I've mailed the seller, who has offered to CLA it. I'd rather him than me!!!!! Very Happy


Reply

Getting at the blades from the rear is a real hassle, you have to disassemble the entire aperture lever mechanism to remove the back lens group - not something you do quick and easy - but you can lift out the entire front lens group from the front after removing the locking ring and four setting screws, shouldn't take more than 10 minutes. I think you can lift the entire blade mechanism out from the front after removing the front lensgroup, but since I didn't go that far I'm not in a position to say for sure... Try the seller first, if something goes wrong you'll get a refund.

[edit] - Yes, the copies I've tried all stopped down correctly, with good and positive lever motion. Try holding the lever in active position and turning the aperture ring - you should be able to see or "feel" exactly where the blades hang. Does the F2-F2.8-F4 settings seem correct to you? The F2 setting should move the blades in by app. 2mm...


Reply

Hold on... in the 'active position'? OK....If I apply gentle pressure to the direction (to the aperture lever) it is travelling in when stopping down...it goes to F16 nay bother...! Please tell me it's not meant to do that Very Happy Very Happy.

Is this really much to be worried about in all honesty?



Last edited by pbking on Sat Jun 13, 2015 4:21 pm; edited 1 time in total


Reply

Well, that's a sticky blade for sure... That lever is directly coupled to the aperture mechanism - it's meant to transmit the aperture position to the body. Normally a few tenths of a N would be applied to it - that would help matters somewhat, but the aperture mechanism should work freely without this help. Does aperture always stop at the same position when you work the other lever, the actuation lever? (the one with spring-tension on it)

I'd say a CLA is needed - the problem can only get worse if you let it be, and if the seller agreed to do it, then let him do it. Less risk for your own sake.


Reply

OK (I know...I know) but I've entirely disassembled the lens (!).

I've also solved the problem!!! I bathed the aperture blades in lighter fluid...and boy, it shot open!!! Oh my, are we ever going to have a lot of photos when I get it back together!!
I've been documenting this , as there isn't any CLA online....so I'ma make one!! Very Happy


Last edited by pbking on Sat Jun 13, 2015 4:21 pm; edited 1 time in total


Reply

Congrats! We all look forward your samples!


Reply

I've left the entire aperture mechanism in naptha/paraffin for a little while....I'm hungry now!!
Will blow the bejasus out of it with compressed air, to remove any remaining fluid before reassembly. Watch this space !!

{edit};
while(aperture!=sticky)
{
//all fully assembled now, working like a charm!! Will post pics of the CLA later this evening;
}

Liam


Reply

----

Last edited by pbking on Sat Jun 13, 2015 4:21 pm; edited 1 time in total


Reply

Great one, thank you very much for this! Very Happy


Reply

most welcome! I did it for the Greater Good, and benefit of Lenskind


Reply

thanks! great tuto, will come handy if I need to CLA one of my contax


Reply

Excellent work, thanks very much for this! For the benefit of Lenskind, could you give a link to the Zeiss exploded diagram?

Last edited by peterqd on Sat Jun 13, 2015 5:48 pm; edited 1 time in total


Reply

It's on my laptop (currently downstairs), so I'll pop it up in the morning Smile

L


Reply

Great info, thanks!


Reply

Hi,

I have since PMed the guy who sent the diagram, but he hasn't replied yet.
I will contact Zeiss. Impending EOS 5D...so I clean cut the aperture tab off...ruined my best goddamn pair of snips, but hey!! no mirror issues (I hope!!) w00t463!


Reply

I'll try the sequence from the flickr set to clean/lubricate a Rollei HFT Planar 50/1.8 (in QBM mount, lenses are very dirty inside, and the focusing action is very dry). The lens looks very similar to the Zeiss Planar, the front ring unscrews just like it, and I can see three screws holding the front group. Didn't go any further yet - I'll post my results here if I succeed.

UPD: Nope, it's different past that point. It's simpler to access the blades from the rear of the lens by removing the mount and unscrewing the entire rear lens group.