It is a version of adapter M42-4/3 which besides the basic functions (fastening of lens М42) has in a forward part of fastening a platform with widespread thread М52х0.75 which allows to establish objectives "back to front", i.e. a forward lens to a bayonet joint, better quality with reference to macro thus is provided, rather than at use of the same objective by standard image.
You can make macro-lens using reversed any normally lens and this adapter!
Reversed lens - is one of the elementary ways to reach a usual lens of very big increases and make good macro pictures.
By means of adapter М42-4/3 reversed lens 52 it is possible to make reversed lens the fellow of any objective with a forward thread under filter M52x0.75 (Helios-44М-Х, Zenitar 50/1.7, Helios-77, Takumar 50/1.4 etc.) and also with any other carving using transitive rings (52x49, 52x55 …)
1. Reliability and durability (the adapter is made of a steel)
2. solid steel construction (for heavy lenses)
3. black matte covering (for correct work exposure)
4. aperture pin blocking place
5. special platform for AF/IS chip (dandelion)
6. fixing screw (for reliable fixing of objectives М42)
7. additional thread М52 for reversed lens
8. double functions: М42-4/3 adapter and reversed lens function for macro
9. comfortable design
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum