MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

Front/Back focus when focusing by eye
View previous topic :: View next topic  


Reply

Heyo. I'm using the Olympus E510 with manual lenses, but I realize that the lenses (especially longer ones) can back or front focus when they appear completely in focus on the viewfinder. Has anyone else noticed this before, and is there a good way to remedy it? Currently, my tactic is to deliberately front/back focus with each individual lens to ensure that everything's somewhat spot on.


Reply

Do you use any helper ? AF confirmation chip or split screen ? With normal finder focusing is pure luck in my opinion.


Reply

I have a E-510 too and do mostly manual focusing (with my special lenses), works pretty well esp. using liveview w. 7x/10x mag.
So in short, no issues at all from 8mm fisheye to 800mm mirror lens (all manual, as said before).


Reply

fenris wrote:
Heyo. I'm using the Olympus E510 with manual lenses, but I realize that the lenses (especially longer ones) can back or front focus when they appear completely in focus on the viewfinder. Has anyone else noticed this before, and is there a good way to remedy it? Currently, my tactic is to deliberately front/back focus with each individual lens to ensure that everything's somewhat spot on.


Maybe the focus screen is not placed correctly.
With low-end cameras, often the manufacturer does not check the correct position of focus screens, so when the image appears perfectly in focus on the screen, than you find that the actual image, could be, less or more, out of focus.

My advice is to send the camera in, asking for a focus convergence (the image on screen has to be the same as on sensor plane).
Generally, this procedure is accomplished putting a shim on the screen frame to correct the front/back focus effect.

Hope this help.


Gaetano


Reply

Hmm...alright. Well for me I note the issue primarily with film lenses. I have my standard digitals and the focus seems spot on. Doesn't hurt to get it calibrated while still under warranty, tho.