MFlenses - A new life in a digital age
MFLenses 2026

Manual Focus Lenses Forum

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.

Explore the world of vintage lenses through repair notes, real test shots, and detailed archive threads packed with images.
Spotlight

Featured partner placement for the forum front page.

How to prevent dust particles entering lens when dismantled?
View previous topic :: View next topic  


Reply

How do you keep dust particles from entering the lens you are repairing? Do you have a special workplace or any other tricks?

I've done some basic repairs on few lenses on my kitchen table. After I've put the lenses back together there has always been some dust particles inside. I know that the affect of a couple dust specs is neglible on the IQ but of course it would be nicer not to have them there.

The reason I'm asking this is that I've got a 50mm S-M-C Takumar f1.4 (which needs some work) coming my way. And of course I'd like it to come out as good possible.


Reply

I haven't tried this with lenses, but I was also getting particles of dust and old foam etc in the space between the prism and focussing screen when I was rebuilding a couple of cameras recently. I borrowed the vacuum cleaner and used a very soft camel-hair artist's paintbrush to dislodge and suck out the dust immediately before I mounted the prism.


Reply

That's a good tip.

It takes me a few attempts to get the focus screen on my 40D free from specs whenever I change it.