| 查看上一个主题 :: 查看下一个主题 |
| 作者 |
内容 |
GrahamR
 注册时间: 2018年2月1日 文章: 55
|
 发表于: 周二 3月 27, 2018 11:22 pm 文章标题: Carl Zeiss HFT Planar 50mm 1.4 vs Planar ZE/ZF |
|
 发表于: 周二 3月 27, 2018 11:22 pm 文章标题: Carl Zeiss HFT Planar 50mm 1.4 vs Planar ZE/ZF |
|
|
GrahamR wrote:
Hi i have a question,how similar is the Older 50mm 1.4 zeiss planar HFT/T*,to the modern Planar 50mm 1.4 ZE/ZF?
Thanks.
最后由 GrahamR 于 周二 3月 27, 2018 11:43 pm 编辑;共编辑 1 次 |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周二 3月 27, 2018 11:43 pm 文章标题: |
|
 发表于: 周二 3月 27, 2018 11:43 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Same design, just updated to use modern glass types as the glasses used in the 70s are now banned, largely due to environmental regulations as they contained things like lead that are toxic to the environment. Coatings may have been updated too. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
GrahamR
 注册时间: 2018年2月1日 文章: 55
|
 发表于: 周二 3月 27, 2018 11:46 pm 文章标题: |
|
 发表于: 周二 3月 27, 2018 11:46 pm 文章标题: |
|
|
GrahamR wrote:
| iangreenhalgh1 写道: |
| Same design, just updated to use modern glass types as the glasses used in the 70s are now banned, largely due to environmental regulations as they contained things like lead that are toxic to the environment. Coatings may have been updated too. |
Ahhh thank you i always wondered what the difference was,as i recently got a great condition planar hft 1.4 made in germany,so i thought i'd ask.
Btw is it a similar story in the case of the voigtlander Hft Planar vs the Nokton 50mm? |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周三 3月 28, 2018 12:30 am 文章标题: |
|
 发表于: 周三 3月 28, 2018 12:30 am 文章标题: |
|
|
iangreenhalgh1 wrote:
No, the Nokton is completely different. The Planar 1.4/50, if it can be said to descend from anything would be a descendant of the 1.4/55 Planar for Contarex. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
GrahamR
 注册时间: 2018年2月1日 文章: 55
|
 发表于: 周三 3月 28, 2018 7:01 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 7:01 pm 文章标题: |
|
|
GrahamR wrote:
Ahhhh i see thank you. |
|
| 返回顶部 |
|
 |
papasito
 注册时间: 2015年1月9日 文章: 1721
|
 发表于: 周三 3月 28, 2018 7:11 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 7:11 pm 文章标题: |
|
|
papasito wrote:
| iangreenhalgh1 写道: |
| No, the Nokton is completely different. The Planar 1.4/50, if it can be said to descend from anything would be a descendant of the 1.4/55 Planar for Contarex. |
AFAIK, the 1.4/55 Planar for Contarex is the ascendant of the
Planar 1,4/50 HFT
Mamiya/Sekor 1,4/55
Rolleinar 1,4/55 (brother of the Mamiya one) |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周三 3月 28, 2018 7:38 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 7:38 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
My understanding is that the Japanese 1.4/55s as made by several makers such as Tomioka and Mamiya use the Zeiss Planar 1.4/55 design - once the patent ran out, they were free to copy it. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
y
 注册时间: 2013年8月11日 文章: 338 来自: EU
|
 发表于: 周三 3月 28, 2018 8:51 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 8:51 pm 文章标题: |
|
|
y wrote:
| papasito 写道: |
| iangreenhalgh1 写道: |
| No, the Nokton is completely different. The Planar 1.4/50, if it can be said to descend from anything would be a descendant of the 1.4/55 Planar for Contarex. |
AFAIK, the 1.4/55 Planar for Contarex is the ascendant of the
Planar 1,4/50 HFT
Mamiya/Sekor 1,4/55
Rolleinar 1,4/55 (brother of the Mamiya one) |
It is probable the C/Y Planar was based on the earlier Planar for Rollei QBM. They are optically not the same - compare the rear element diameter.
As was mentioned, all Japanese 55/1.4 lenses are derived from the Contarex Planar 55/1.4 in some way. |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周三 3月 28, 2018 9:49 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 9:49 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Marco Cavina produced the definitive work on the Planar evolution:
http://www.marcocavina.com/articoli_fotografici/Zeiss_Planar_50mm_story/00_pag.htm
According to Marco, the Planar 1.4/50 for Rollei and C/Y are the same and the modern Z series 12.4/50 is also the same, just with minimal modifications. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
GrahamR
 注册时间: 2018年2月1日 文章: 55
|
 发表于: 周三 3月 28, 2018 10:04 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 10:04 pm 文章标题: |
|
|
GrahamR wrote:
Wow so where do they get those incredibly inflated prices from for the modern versions? |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周三 3月 28, 2018 10:36 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 10:36 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
Not inflated at all, the 1.4/50 was a very expensive optic to produce and was always expensive to buy. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
GrahamR
 注册时间: 2018年2月1日 文章: 55
|
 发表于: 周三 3月 28, 2018 11:24 pm 文章标题: |
|
 发表于: 周三 3月 28, 2018 11:24 pm 文章标题: |
|
|
GrahamR wrote:
| iangreenhalgh1 写道: |
| Not inflated at all, the 1.4/50 was a very expensive optic to produce and was always expensive to buy. |
Ahh i see ,do you have any comparative photos of the older hft vs the modern z versions? |
|
| 返回顶部 |
|
 |
calvin83
 注册时间: 2009年4月12日 文章: 7740 来自: Hong Kong
|
 发表于: 周四 3月 29, 2018 2:38 am 文章标题: |
|
 发表于: 周四 3月 29, 2018 2:38 am 文章标题: |
|
|
calvin83 wrote:
The Rollei is slightly wider than the Contax version from the various data i collected. They do perform more or less the same expect the color. _________________ The best lens is the one you have with you.
https://lensfever.com/
https://www.instagram.com/_lens_fever/ |
|
| 返回顶部 |
|
 |
itsfozzy
 注册时间: 2014年10月20日 文章: 327 来自: Stoke-on-Trent UK
Expire: 2021-04-14
|
 发表于: 周五 3月 30, 2018 9:24 am 文章标题: |
|
 发表于: 周五 3月 30, 2018 9:24 am 文章标题: |
|
|
itsfozzy wrote:
There are two versions of the Mamiya 55mm f/1.4, the normal one was made by *Tomioka and the SX was made by Mamiya. The SX was the better lens and I've also read (probably on MFlenses) that it was based on the defunct Planar Contarex lens.
*Whenever I say Tomioka, I'm referring to a group of very closely related optical companies that shared parts and optics such as Cosina and Ricoh etc. _________________ https://simonforsterphotographic.co.uk/
The Classic Lenses Podcast https://www.classiclensespodcast.com/
My eBay Shop http://stores.ebay.co.uk/itsfozzy-Photography
Large Format Photography Podcast
https://largeformatphotographypodcast.podbean.com/
My Flickr Albums (more than 150 lens sample shots) https://www.flickr.com/photos/125323761@N07/albums
https://www.facebook.com/SimonForsterPhotographic/
https://www.facebook.com/groups/classiclenses/ |
|
| 返回顶部 |
|
 |
GrahamR
 注册时间: 2018年2月1日 文章: 55
|
 发表于: 周五 3月 30, 2018 9:30 pm 文章标题: |
|
 发表于: 周五 3月 30, 2018 9:30 pm 文章标题: |
|
|
GrahamR wrote:
Ok found this while reading up on something else.
In 1972, while Zeiss was flirting around in the attempt to find a partner to get back into the camera industry, their only solid partnership was the one with Rollei. All of Zeiss production capacity for the 35mm format was thus dedicated to the SL-35. In that time a few Contarex lenses were still being released, but they should be considered as lenses for Rollei incidentally produced in very small batches in Contarex mount (mostly for pride’s sake). The extensive commitment to the design of the Planar 1.8/50 for Rollei is an indication that already in the late 60’s Zeiss managers saw the Contarex system as a “dead man walkingâ€. A Contarex-mount Distagon 15mm f/3.5 was presented at Photokina 1972, but just for show: it was an incomplete and rushed assembling lacking aperture control and a floating system for close-focus. One year later, although Contarex cameras were still technically in production, the same lens was marketed with a new, refined construction in Rollei-mount only. Of the famous F-Distagon 16mm f/2.8 only 150 units were made in Contarex mount, whereas the Rollei version was manufactured in regular batches. Other premium lenses were directly first-presented in Rollei mount (and in some cases never released in Contarex mount), including the Distagon 4/18 HFT (1972), the Distagon 2.8/35 (1973, later purported to the Contax system), the Sonnar 2.8/85 (1970), the Tele-Tessar 4/135 and 4/200 (1970). Even the Contarex Planar 85mm f/1.4, considered the crown jewel of the Contarex system, is the object of a mass delusion: it was introduced in 1973 for the Rollei SL-35 and only in 1974 for the Contarex – as many brochures of the time testify.
In those years Rollei requested a new, faster 50mm to be offered as a premium alternative to the f/1.8 model. Again, Zeiss didn’t recycle the old (and somewhat unimpressive) Contarex Planar 1.4/55 nor the 1963 1.4/50 prototype. A new lens was designed from scratch by Karl-Heinz Behrens and Erhard Glatzel in 1972. This new 50mm f/1.4 was later purported to the Contax system (both the standard and the autofocus N-mount) and, with minor modifications, to modern DSLR: it is substantially the same Planar 1.4/50 currently marketed as ZE (Canon), ZF (Nikon) and ZK (Pentax).
Full article here http://vintage-camera-lenses.com/carl-zeiss-planar-history-part-2/ |
|
| 返回顶部 |
|
 |
itsfozzy
 注册时间: 2014年10月20日 文章: 327 来自: Stoke-on-Trent UK
Expire: 2021-04-14
|
 发表于: 周五 3月 30, 2018 9:57 pm 文章标题: |
|
 发表于: 周五 3月 30, 2018 9:57 pm 文章标题: |
|
|
itsfozzy wrote:
| GrahamR 写道: |
Ok found this while reading up on something else.
In 1972, while Zeiss was flirting around in the attempt to find a partner to get back into the camera industry, their only solid partnership was the one with Rollei. All of Zeiss production capacity for the 35mm format was thus dedicated to the SL-35. In that time a few Contarex lenses were still being released, but they should be considered as lenses for Rollei incidentally produced in very small batches in Contarex mount (mostly for pride’s sake). The extensive commitment to the design of the Planar 1.8/50 for Rollei is an indication that already in the late 60’s Zeiss managers saw the Contarex system as a “dead man walkingâ€. A Contarex-mount Distagon 15mm f/3.5 was presented at Photokina 1972, but just for show: it was an incomplete and rushed assembling lacking aperture control and a floating system for close-focus. One year later, although Contarex cameras were still technically in production, the same lens was marketed with a new, refined construction in Rollei-mount only. Of the famous F-Distagon 16mm f/2.8 only 150 units were made in Contarex mount, whereas the Rollei version was manufactured in regular batches. Other premium lenses were directly first-presented in Rollei mount (and in some cases never released in Contarex mount), including the Distagon 4/18 HFT (1972), the Distagon 2.8/35 (1973, later purported to the Contax system), the Sonnar 2.8/85 (1970), the Tele-Tessar 4/135 and 4/200 (1970). Even the Contarex Planar 85mm f/1.4, considered the crown jewel of the Contarex system, is the object of a mass delusion: it was introduced in 1973 for the Rollei SL-35 and only in 1974 for the Contarex – as many brochures of the time testify.
In those years Rollei requested a new, faster 50mm to be offered as a premium alternative to the f/1.8 model. Again, Zeiss didn’t recycle the old (and somewhat unimpressive) Contarex Planar 1.4/55 nor the 1963 1.4/50 prototype. A new lens was designed from scratch by Karl-Heinz Behrens and Erhard Glatzel in 1972. This new 50mm f/1.4 was later purported to the Contax system (both the standard and the autofocus N-mount) and, with minor modifications, to modern DSLR: it is substantially the same Planar 1.4/50 currently marketed as ZE (Canon), ZF (Nikon) and ZK (Pentax).
Full article here http://vintage-camera-lenses.com/carl-zeiss-planar-history-part-2/ |
Nice link and an interesting read. _________________ https://simonforsterphotographic.co.uk/
The Classic Lenses Podcast https://www.classiclensespodcast.com/
My eBay Shop http://stores.ebay.co.uk/itsfozzy-Photography
Large Format Photography Podcast
https://largeformatphotographypodcast.podbean.com/
My Flickr Albums (more than 150 lens sample shots) https://www.flickr.com/photos/125323761@N07/albums
https://www.facebook.com/SimonForsterPhotographic/
https://www.facebook.com/groups/classiclenses/ |
|
| 返回顶部 |
|
 |
iangreenhalgh1
 注册时间: 2011年3月18日 文章: 15679
Expire: 2014-01-07
|
 发表于: 周五 3月 30, 2018 10:18 pm 文章标题: |
|
 发表于: 周五 3月 30, 2018 10:18 pm 文章标题: |
|
|
iangreenhalgh1 wrote:
That's the same article by Marco Cavina that I already linked to on Marco's site. There isn't anything else written on the Planars of note that i am aware of. _________________ I don't care who designed it, who made it or what country it comes from - I just enjoy using it! |
|
| 返回顶部 |
|
 |
|
|
|
您不能在本版块发表新主题 您不能回复本版块的主题 您不能编辑自己在版块内的文章 您不能删除自己在版块内的文章 您不能参与本版块的投票
|