Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

KMZ PO2-2M 75mm f2 Soviet Lens
View previous topic :: View next topic  


PostPosted: Sun Sep 06, 2020 7:38 pm    Post subject: KMZ PO2-2M 75mm f2 Soviet Lens Reply with quote

It's a lens block, hasn't had lens mount yet. I just inserted it to an M52-M42 helicoid, un-leveled, so you probably can see the left side wasn't focused (not the large aperture ones Smile). Hope still can roughly see the performance of this lens. Camera is Sony A7R. BTW, the serial number on my lens is 75XXXX, I guess it is a very late version.













PostPosted: Wed Sep 30, 2020 8:54 pm    Post subject: Reply with quote

Like 1 Like 1 Like 1

Ecellent lens, have it, too!


PostPosted: Fri Oct 02, 2020 5:07 pm    Post subject: Reply with quote

kds315* wrote:
Like 1 Like 1 Like 1

Ecellent lens, have it, too!


Thanks Klaus! I knew you have it, when I going to buy a rare lens always check your posts on MF, Flickr first. Smile

I saw you have the G (J?)-48 100/2, do you have the info for the diameter of the filter thread?

Thank you!


PostPosted: Fri Oct 02, 2020 5:59 pm    Post subject: Reply with quote

cellotone wrote:
kds315* wrote:
Like 1 Like 1 Like 1

Ecellent lens, have it, too!


Thanks Klaus! I knew you have it, when I going to buy a rare lens always check your posts on MF, Flickr first. Smile

I saw you have the G (J?)-48 100/2, do you have the info for the diameter of the filter thread?

Thank you!


I don't think there is filter thread at all on the J-48.


PostPosted: Fri Oct 02, 2020 10:34 pm    Post subject: Reply with quote

Like 1 Like 1 Like 1 small


PostPosted: Sat Oct 03, 2020 12:16 pm    Post subject: Reply with quote

There is a fine thread (aprox 51.5mm), but it sits very deep in the front and was used to mount the front lens,
so cannot be used for a filter or sunshade.


PostPosted: Fri Oct 23, 2020 7:05 pm    Post subject: Reply with quote

kds315* wrote:
There is a fine thread (aprox 51.5mm), but it sits very deep in the front and was used to mount the front lens,
so cannot be used for a filter or sunshade.


I have found hoods for the J-48 100/2 and KMZ PO2-2M lenses.

The J-48 has a 60mm outer diameter on the top of the lens, so both Canon S-60 (rubber), and T-60-2 (metal) slip-on hoods work for the lens. See pictures #1-3.

The KMZ PO-2-2M has 45mm thread, but it's not easy to find a 45mm hood. I used a 45-46mm step-up ring, then bought a B+W 900 46mm lens hood works well on the lens. Picture #4.









PostPosted: Sat Oct 24, 2020 9:57 am    Post subject: Reply with quote

Good idea, great finds! Like 1 small Like 1 small


PostPosted: Sat Oct 24, 2020 4:30 pm    Post subject: Reply with quote

RO2-2M often come with original hood, that works very well on 24x36, despite the fact that it was made for S35.

Here is mine :


PostPosted: Sun Oct 25, 2020 12:33 am    Post subject: Reply with quote

BurstMox wrote:
RO2-2M often come with original hood, that works very well on 24x36, despite the fact that it was made for S35.

Here is mine :


Nice! My seller didn't sell the shade together. So I have to find it myself..