Posted: Thu Oct 01, 2020 8:33 am Post subject: Introduction of VEGA-11U 54mm F3 inside Helios-44 helicoid |
|
|
LLB! wrote:
A thin-walled sleeve is made with a thread inside, after which it is glued into the body of the helicoid. Before gluing, you need to set the lens to infinity.
Epoxy glue connects the back of the helicoid to the camera adapter.
#1
#2
#3
#4
#5
#6
#7
#8
Two photos taken with this lens stitched together from several images by the Hugin program. Sony NEX-5
#1
#2
|