Posted: Sun Aug 09, 2020 2:33 pm Post subject: Tele-Zoomar 170-320/4 repair or diagram |
|
|
Arees wrote:
I picked one up in a box of other stuff and it is focusing WAY past infinity. It will focus at infinity only if you set it to what should be the MFD at 320mm. Everything else is varying degrees of out of focus.
Someone has obviously been inside this lens in the past so I assume something is either backwards or in the wrong place but I can't find a lens diagram anywhere. It's one of the first zoom lenses ever and doesn't seem to follow the more modern designs that I'm somewhat familiar with the innards of--though 90% of my lens repair has been on MF primes or large format so who knows if I'm right.
I've flipped the two easily accessible elements around in all possible configurations to no avail. The focusing is done, it appears, by the single front element. Nothing else moves when you operate the focus. I've adjusted it as far in and out as possible without fixing anyone as well.
If anyone has experience with these, or any insight into the design, or insight into the problem, please let me know. |