Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Disassembly preset Takumar 1:2.8 105mm
View previous topic :: View next topic  


PostPosted: Tue Aug 04, 2020 9:43 pm    Post subject: Disassembly preset Takumar 1:2.8 105mm Reply with quote

I have a beautiful sample of this lens with a very stiff focussing ring and some play on it. I want to disassemble the lens to clean and re-grease, but I doný know how to start. Does any of you know how to proceed or can provide link to instructions?

Regards,


Last edited by huge10 on Wed Aug 05, 2020 6:58 pm; edited 1 time in total


PostPosted: Tue Aug 04, 2020 9:52 pm    Post subject: Reply with quote

Welcome huge10

105mm?

I'd like to know too, for a 135mm. Thanks for topic.


PostPosted: Wed Aug 05, 2020 9:23 am    Post subject: Reply with quote

Yes, Sorry for the typo.

I don't know if both lenses have the same barrel. I unscrewed the name ring. The name ring holds the front element. There is a chance that, with the name ring removed, the filter thread ring can be inscrewed. But I'd rather prefer to know for sure before applying to much torque.

Regards, Wim