Home
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Opemus 2 m39 lens plate
View previous topic :: View next topic  


PostPosted: Thu Dec 28, 2017 8:23 am    Post subject: Opemus 2 m39 lens plate Reply with quote

Anyone know where to get one?


PostPosted: Mon Jan 01, 2018 5:42 pm    Post subject: Re: Opemus 2 m39 lens plate Reply with quote

Quote:
Incidentally, there are two series of enlarging lenses available from Meopta for the Opemus. The Meogon f/5.6s are six-element designs and represent the best Meopta can provide. The Anaret f/4.5 lenses are low priced, and while not up to the performance of the Meogons, we found them perfectly adequate for non-critical work. Unfortunately these lenses fit no known thread other than those in Meopta lensboards, so if you want to use Schneider, Rodenstock or Nikkor enlarging lenses you'll have to order the proper lensboard when you order the enlarger.


http://www.jollinger.com/photo/enlargers/meopta.html

Keep checking/ask about https://www.fotoimpex.de/shopen/darkroom/meopta-lensboard-m39-axomat-5-opemus-6-etc.html


PostPosted: Tue Jan 02, 2018 6:22 pm    Post subject: Reply with quote

thanks!

I think that is a diy-job.


PostPosted: Sun Feb 11, 2018 5:33 pm    Post subject: Re: Opemus 2 m39 lens plate Reply with quote

visualopsins wrote:
Quote:
Incidentally, there are two series of enlarging lenses available from Meopta for the Opemus. The Meogon f/5.6s are six-element designs and represent the best Meopta can provide. The Anaret f/4.5 lenses are low priced, and while not up to the performance of the Meogons, we found them perfectly adequate for non-critical work. Unfortunately these lenses fit no known thread other than those in Meopta lensboards, so if you want to use Schneider, Rodenstock or Nikkor enlarging lenses you'll have to order the proper lensboard when you order the enlarger.


http://www.jollinger.com/photo/enlargers/meopta.html

Keep checking/ask about https://www.fotoimpex.de/shopen/darkroom/meopta-lensboard-m39-axomat-5-opemus-6-etc.html
The Belar and Meogon lenses are supplied in normal M39 mounts. http://www.meoptahistory.com/index.php?id=350


PostPosted: Mon Feb 12, 2018 6:05 am    Post subject: Re: Opemus 2 m39 lens plate Reply with quote

Martin Rick wrote:
The Belar and Meogon lenses are supplied in normal M39 mounts. http://www.meoptahistory.com/index.php?id=350


yes but the Meopta II enlarger doesn't accept m39, just the smaller 20,5mm thread


PostPosted: Mon Feb 12, 2018 7:47 am    Post subject: Reply with quote

for my Opemus 5 i had m39 lensboard custom made so i can use 2 el-nikkors i have


PostPosted: Tue Feb 13, 2018 4:12 pm    Post subject: Re: Opemus 2 m39 lens plate Reply with quote

kansalliskalaCafe wrote:
Martin Rick wrote:
The Belar and Meogon lenses are supplied in normal M39 mounts. http://www.meoptahistory.com/index.php?id=350


yes but the Meopta II enlarger doesn't accept m39, just the smaller 20,5mm thread
Ooops Embarassed