Home
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Disassembling the Canon 50mm f/0.95 ?
View previous topic :: View next topic  


PostPosted: Thu Nov 16, 2017 2:59 pm    Post subject: Disassembling the Canon 50mm f/0.95 ? Reply with quote

Hello!
Has anybody disassembled the Canon 50mm f/0.95 “The Dream Lens”
for cleaning? I know you can send it away for a pro cla job… but is it possible to diy?!
Nothing about it on the net,as far as i can see. Have a nice day!

( As far as i can see,the 50mm 1.2 ltm is not
to difficult to cla…. but the 0.95 might be more complicated i guess. )


PostPosted: Thu Nov 16, 2017 3:14 pm    Post subject: Reply with quote

Probably not all that complicated, it being a rangefinder lens and all. Manual diaphragm. I'd have to look at one to see how you'd go about opening it up. I'm thinking at a minimum you'll need a good lens spanner and some proper screwdrivers.


PostPosted: Thu Nov 16, 2017 3:44 pm    Post subject: Reply with quote

cooltouch wrote:
Probably not all that complicated, it being a rangefinder lens and all. Manual diaphragm. I'd have to look at one to see how you'd go about opening it up. I'm thinking at a minimum you'll need a good lens spanner and some proper screwdrivers.


Thanks for input!
Yeah… i got the tools ready! But what puzzles me is
the fact that there is NOTHING about it on Youtube etc..
Guess i`ll take the 50mm 1.2 ltm apart first - as a “training assignment” !