Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Kodak 63mm 2.7 anastigmat
View previous topic :: View next topic  


PostPosted: Wed Aug 30, 2017 5:29 pm    Post subject: Kodak 63mm 2.7 anastigmat Reply with quote

Hi, I have just bought another of this lens, the aperture opens too wide and doesn't close down to f22, everything looks ok after removing the aperture indicator ring, the slot looks ok but I noticed fine shavings of brass so I want to remove the aperture assembly and have a propper look at it but can't see how it comes out, it may be stuck in with gunge.
Any assistance is welcome.

Thanks John.


PostPosted: Sat Sep 02, 2017 2:11 am    Post subject: Reply with quote

General lens disassemble instructions...

Show a few photos of the lens to get more. .. Smile


PostPosted: Sat Sep 02, 2017 5:50 am    Post subject: Reply with quote

visualopsins wrote:
General lens disassemble instructions...

Show a few photos of the lens to get more. .. Smile

#1


#2


#3


#4




I need someone who has knowledge of this lens to advise how aperture assembly is removed from the lens body.

Photos as requested, john


PostPosted: Sun Sep 10, 2017 7:00 pm    Post subject: THANKS Reply with quote

Well thanks for your help, everyone has been just wonderfull.