Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Uran 27: how to adapt it for Fuji cameras?
View previous topic :: View next topic  


PostPosted: Tue Mar 29, 2016 8:28 pm    Post subject: Uran 27: how to adapt it for Fuji cameras? Reply with quote

Hi,
A Russian friend of mine bought for me the Uran 27 lens. It is on its way to me. So the question is now: how to adapt it on my Fuji X-t10?

Thanks.


PostPosted: Tue Mar 29, 2016 11:01 pm    Post subject: Reply with quote

Pretty large beast for such a little camera...

You will need a lens adapter, a focusing helicoid, and a camera adapter
and you're all set and ready to go. Enjoy the ride, once you're through that
you'll learned quite a bit Wink

Basically what I have shown here: http://forum.mflenses.com/how-to-modularily-mount-a-projection-lens-t70393,highlight,%2Bprojection.html


PostPosted: Wed Mar 30, 2016 8:05 am    Post subject: Reply with quote

The hardest part is to adapt the rear part to something usable. The easiest way is to use the screw mounts of the lens.
At first, I did this convertion to M42 :




It worked very good, but was not very praticable.
So a friend did for me this M42 adapter using screws of the lens.



But this is a great lens, it's worth to adapt it good.