Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

The VNEX enlarger lens project V2.0
View previous topic :: View next topic  


PostPosted: Sun Dec 07, 2014 9:34 pm    Post subject: Re: adapter Reply with quote

kds315* wrote:
europanorama wrote:
hallo
hab das vnex-system hier wiederentdeckt
zwei sachen
1. adapter-lieferant sorry wenn schnee von gestern
http://www.ebay.com/sch/procameras_pt/m.html?item=321521700072&hash=item4adc2fcce8&pt=UK_Photography_CameraLenses_Lens_caps_hoods_adaptors_ET&rt=nc&_trksid=p2047675.l2562

2. zoerk hat mini-macroschnecke 25.5 bis 60mm auszug. kameraseite m42- optikseite: 41mm.maximacro-version gab es auch mal oder immer noch. diese evtl. für grössere aufnahmefornate.
hoffentlich find ich wen der all die adapter liefern kann die für all meine linsen nötig sind.


... nicht unbedingt, wenn man in einem Englischen Forum auf Deutsch fragt... Wink


LOL Laughing


PostPosted: Thu Mar 17, 2016 8:45 pm    Post subject: Reply with quote

Lovely looking bit of kit. How much and where do I get it?


PostPosted: Sat Jul 02, 2016 3:53 pm    Post subject: Reply with quote

Will be *STL-Files available of the VNEX system in future?
My 3D-Printer would be proud to print them Wink


PostPosted: Sat Sep 09, 2017 11:15 pm    Post subject: Reply with quote

Hi,

Thank you for this excellent tutorial.

Could you please tell me how much cost vnex, and where to buy it ?

Thanks !


PostPosted: Sun Sep 10, 2017 7:22 am    Post subject: Reply with quote

willy35 wrote:
Hi,

Thank you for this excellent tutorial.

Could you please tell me how much cost vnex, and where to buy it ?

Thanks !


Hi,

the "basic set" is 129 Euro + shipping and contains following parts:

-VNEX module with the mount you wish
(depending on your camera = for Sony you will get a VNEX KB2.0, for µFT mount you will get a VNEX universal)

Short explanation:
There are two different VNEX Versions... one for Sony E-Mount and one for the lot smaller µFT Mount. The µFT "mount - hole" needs a total different construction and can only support cams up to APS-C sensors/format. So this "VNEX universal" can be used on Fuji, µFT, Sony NEX and others by simply change the mount on the module (it was build with a 52mm reverse ring... so simply change the reverse ring if you want to use it on more then one System.

The Sony Version has a wider "hole" and must cover "fullframe" of the Sony A7 line of cams. So the rotating inner tube is a lot wider (41.5mm instead of 36mm for the VNEX universal.

Lets go on with the parts...

- VNEX modul, depending on your cam
- 1 pcs. 9mm connector M39 for your enlarger lens
- 1 pcs. 12mm connector M39 for your enlarger lens
- 1 pcs. inner connector (to cascade the 9 and 12mm connectors to a new value of 21mm
- 1 pcs. 25mm tube with M39 thread on the outer side for the use of 80mm enlarger lenses. It acts as a "Spacer ring".
- 1 pcs. screw tool for for lock the thread in the connectors

This are the parts of the basic version.

The "extended Version" contains some additional parts and costs 169 Euro + shippiing

- an additional 6mm connector (together with an additional inner connector you can build 6, 9, 12mm (only with the single connectors, 15mm (combined 6 and 9mm), 18mm (combined by 12 + 6mm connector), 21mm (combined by 9+12mm connector), 27mm (combining 6, 9, 12mm).
This gives more flexibility...

- a reverse tube with 40.5mm to M39 threat diameter. We call this "macro reverse tube". The trick is to use the tube on enlarger lenses with a filter diameter of 40.5mm (for example Rodenstock, newer Nikon, some Hoya etc. enlarger lenses do have 40.5mm filter threats)., For this enlarger lenses you can use the tube as a "sunshade" on the lens andsimply and fast reverse the tube with the enlarger lens in the connector.
So the sunshade tube acts as a distance ring for macro work up to 1:1 (depending on the sensor of your cam).

- 1 pcs. gender changer 25mm to M39 thread
- 1 pcs. changer from 27mm to M39 thread
- 1 pcs. changer from 30mm to M39 thread
- 1 pcs. changer from 32mm to M39 thread
- 1 pcs. tool for 2mm inbus screws in the changer plates
- 1 pcs. additional inner connector

For further informations contact me via heitchen@digicamclub.de

Regards
Henry


PostPosted: Tue Aug 11, 2020 12:43 am    Post subject: Reply with quote

Is the VNEX system still available for purchase?

kindest regards, phil


PostPosted: Tue Aug 11, 2020 7:29 am    Post subject: Reply with quote

Yes - you can contact Henry (Founder of the VNEX-Project) under
this mail address:
https://www.digicamclub.de/impressum.php?