Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Help identify Konica front caps
Post new topic   Reply to topic
Home   Adapters and other accessories
View previous topic :: View next topic  


PostPosted: Fri Jun 14, 2013 10:49 am    Post subject: Help identify Konica front caps Reply with quote
I need help in identifying the following Konica Front caps. The one in the upper left corner is the standard 55mm cap.

The others have an inner diameter of 65mm (the two smaller ones) and the largest on is 84mm. I only had aruler at hand so I could be 1-2 mm off. Thanks!





PostPosted: Fri Jun 14, 2013 11:45 am    Post subject: Reply with quote
Exactly identifying is probably impossible. Smaller caps would fit 1.2/57, 2.5/135, or 4/80-200 UC zoom (all use 62mm filters). The large cap could be for 2.8/35-100 (82mm filter).


PostPosted: Fri Jun 14, 2013 5:15 pm    Post subject: Reply with quote
+1 as fermy say.


PostPosted: Fri Jun 14, 2013 5:45 pm    Post subject: Reply with quote
Thanks, I think you are right. Plus the smaller caps would fit a 58/1.2 as well.
Post new topic   Reply to topic
Home   Adapters and other accessories
Page 1 of 1