VNEX system enlarger and other lenses on SONY NEX

[Attila]

http://forum.mflenses.com/the-vnex-system-t54300.html
http://forum.mflenses.com/vnex-showroom-for-enlarger-and-other-lens-pictur-t54330.html

The basic version only for M39 enlarger lenses (without tools for experimental thing outside this "normal" lenses) is 129 Euro + Shipping.

The extended version with tools (M25/M27/M30 and M32.5 to M39) - conversion plates etc. is 169 Euro + shipping.

The basic version contains:

1 pcs. premounted VNEX focussing - modul
1 pcs. "Zebra adaptor" M39 to NEX for the VNEX focussing-modul
1 pcs. M39 Inlet (to make the Zebra adaptor working as a normal LTM to Nex Adapter and some other things)
1 pcs. 12mm female M39 lens to VNEX connector
1 pcs. 9mm female M39 lens to VNEX connector
1 pcs. 25mm extension tube (for clearing registerdistance if you want to use 75mm enlarger lenses or if you want to use this as
with a 50mm lens as an extension tube for reproduction scale better then 1:1 in macro work..
1 pcs. hexagonal tool for 3mm screws on the VNEX

The price for this basic Version is 129 Euro + Shipping to the country.. (in Europe mostly 12,60 Euro insured)

The extended Version contains:

the complete basic version..

+ 1 pcs female M25 to M39 conversion plate for M25 lensmount to bring them to M39 female lens connector
+ 1 pcs female M27 to M39 conversion plate for M27 lensmount to bring them to M39 female lens connector
+ 1 pcs female M30 to M39 conversion plate for M30 lensmount to bring them to M39 female lens connector
+ 1 pcs female M32.5 to M39 conversion plate for M32.5 lensmount to bring them to M39 female lens connector

1 additonal pcs. of 6mm female M39 lens to VNEX connector (neccessary for enlarger lenses with very short threatmounts
1 retro - ring for enlarger lenses with a filter diameter of 40.5mm x 0.5.. so you can use such lenses (Rodenstock/Schneider/Nikkor
etc in conjunction with the 25mm macro-tube in retro-position
1 pcs inner connector for the 6,9 and 12mm lens connectors. With this tool you can combine any of the values to get the following values for registerdistance clearing.. 6, 9, 12, 15, 18 and 21mm.


Made and sell by our member Henry his nick name is hinnerker, drop a pm to if you like to buy one.