Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Need Help Re-assembling CZJ 135mm F3.5
View previous topic :: View next topic  


PostPosted: Mon Sep 12, 2011 4:01 pm    Post subject: Need Help Re-assembling CZJ 135mm F3.5 Reply with quote

Took it apart to clean it and relube it as the focus action was getting very stiff.

Well I've done that now but I can't seem to put it back together. Are there any tips? I can't seem to get the focus aligned with the main lens elements into the barrel.


PostPosted: Mon Sep 12, 2011 4:50 pm    Post subject: Reply with quote

Did you separate the helicoil? If so did you mark where the thread starts? It's a multi-thread and there are many starting positions. It will take a lot of patience but you'll do it eventually.

Here's a guide:
http://www.andrew.brown.dsl.pipex.com/articles/czj135svc/


PostPosted: Mon Sep 12, 2011 6:11 pm    Post subject: Reply with quote

Perfect, thanks for the link!!