Posted: Mon Mar 05, 2007 8:56 am Post subject: Re: Scanning problem? |
|
|
Orio wrote:
katastrofo wrote: |
I scanned this image tonight and it looks like there's a slight flare on the
left side.
This is the first scan that has done this, and I'm pondering what else
might cause this phenomenon. I used same room lighting, etc, as with
the others. Perhaps placing a black cloth over the scanner would reduce this,
or turning off all the lights? Any ideas are most appreciated.
Bill
ps didn't know really where to post this, and will take down pic in a few days. |
Bill, you don't need to take the pic down. As for location, I guess that we would need a "post-processing and publishing" forum. I pondered about it, and about other forum proposals we had, but we have already so many forums, that unless we don't see a big urgent need of new ones, I think it's better to stay as we are.
About the flare: have you tried to make other scans and see if the problem reappears? _________________ Orio, Administrator
T*
NE CEDE MALIS AUDENTIOR ITO
Ferrania film is reborn! http://www.filmferrania.it/
Support the Ornano film chemicals company and help them survive!
http://forum.mflenses.com/ornano-chemical-products-t55525.html |