Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!
SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Pentacon 30mm/3.5 dismantle
Post new topic   Reply to topic
Home   Equipment Care and Repairs
View previous topic :: View next topic  


PostPosted: Sun Oct 02, 2011 12:54 pm    Post subject: Pentacon 30mm/3.5 dismantle Reply with quote
I need to remove the black anodising from around the rear flange on my Pentacon 30mm/3.5 lens so that it shorts out the electrical contacts on the camera body. I don't want to do it in situ as I risk getting dust etc into the lens.

If I remove these three screws, will the surround come off without the lens falling to bits?



Thanks for any pointers Very Happy

Graham


PostPosted: Sun Oct 02, 2011 10:19 pm    Post subject: Reply with quote
Sure you can Smile
Dont worry, the first part with the 3 screws is only a cover.


PostPosted: Tue Oct 04, 2011 7:21 am    Post subject: Reply with quote
nyoszi wrote:
Sure you can Smile
Dont worry, the first part with the 3 screws is only a cover.

Brilliant, thankyou Very Happy


PostPosted: Tue Oct 04, 2011 9:15 am    Post subject: Reply with quote
Instead of ruining the finish of the lens, perhaps you might find a feeler quage or brass shimming material to do the shorting between contacts?
Post new topic   Reply to topic
Home   Equipment Care and Repairs
Page 1 of 1