Kodak Monitor six-20 special

[Katastrofo]

Attila, are you respooling the 120 yourself or sending it to Jussi, since he seems to like it.

Looking forward to your pictures!

[Attila]

I think I will simple cut 120mm spool to smaller diameter, it works well and easy. I expect I will love it just same than Jussi
_________________
Attila - admin --- BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic - FOMAPAN on forum - Webshop EU

Items on sale on Ebay

35mm: Konica A4, Konica IIIA, Konica FC-1
MF: Konica Pearl I,II,III 6x4,5 Konica Semi Pearl
Film: Foma,Kodak, Fuji DIY development C41, FOMA LQR
Scan: Epson V500, scanassist (http://www.scanassist.org)
Shutter tester: LCD tester from member vfmoto
Digital: Panasonic G1, Sony Nex-3, Samsung NX100
Lenses: Konica Hexanons,Carl Zeiss,Carl Zeiss Jena,Meyer-Optik,Minolta MD,Yashica ML,Nikon,Olympus OM
DIY E-6,C41 and B&W

[Katastrofo]

Let us know how that works out for you.

[Nesster]

LOL, Bill, it takes me an extra dose of ambition to get started with either respooling or reel clipping. I keep telling myself I need to, but my reels have long nails and the 620 spools cobwebs.
_________________
-Jussi
Camera photos

Print Photographica

[Katastrofo]

Heh, I tried clipping the spool just one time (I only have 3 different kinds of toenail clippers, maybe I should
check if Lindstrom makes a pair) and it was not a good progress.

[Attila]

I use one tool to clip bird and turtle nails I think that will be strong enough, if not works re-spool also not a big job.
_________________
Attila - admin --- BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic - FOMAPAN on forum - Webshop EU

Items on sale on Ebay

35mm: Konica A4, Konica IIIA, Konica FC-1
MF: Konica Pearl I,II,III 6x4,5 Konica Semi Pearl
Film: Foma,Kodak, Fuji DIY development C41, FOMA LQR
Scan: Epson V500, scanassist (http://www.scanassist.org)
Shutter tester: LCD tester from member vfmoto
Digital: Panasonic G1, Sony Nex-3, Samsung NX100
Lenses: Konica Hexanons,Carl Zeiss,Carl Zeiss Jena,Meyer-Optik,Minolta MD,Yashica ML,Nikon,Olympus OM
DIY E-6,C41 and B&W

[Katastrofo]

[Attila]

It works Monitor is loaded with fomapan 100, spool has edge mark around that is 620 size exactly I did cut there with cutters 1-2 to minutes only.
_________________
Attila - admin --- BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic - FOMAPAN on forum - Webshop EU

Items on sale on Ebay

35mm: Konica A4, Konica IIIA, Konica FC-1
MF: Konica Pearl I,II,III 6x4,5 Konica Semi Pearl
Film: Foma,Kodak, Fuji DIY development C41, FOMA LQR
Scan: Epson V500, scanassist (http://www.scanassist.org)
Shutter tester: LCD tester from member vfmoto
Digital: Panasonic G1, Sony Nex-3, Samsung NX100
Lenses: Konica Hexanons,Carl Zeiss,Carl Zeiss Jena,Meyer-Optik,Minolta MD,Yashica ML,Nikon,Olympus OM
DIY E-6,C41 and B&W

[Katastrofo]

Congrats, Attila! Show a picture of those cutters some time. Looking forward to the pictures!

[Attila]

I did use similar sharp front cutter
http://www.getoptical.com/cutting-pliers/66-ac47-front-cutter.html
_________________
Attila - admin --- BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic - FOMAPAN on forum - Webshop EU

Items on sale on Ebay

35mm: Konica A4, Konica IIIA, Konica FC-1
MF: Konica Pearl I,II,III 6x4,5 Konica Semi Pearl
Film: Foma,Kodak, Fuji DIY development C41, FOMA LQR
Scan: Epson V500, scanassist (http://www.scanassist.org)
Shutter tester: LCD tester from member vfmoto
Digital: Panasonic G1, Sony Nex-3, Samsung NX100
Lenses: Konica Hexanons,Carl Zeiss,Carl Zeiss Jena,Meyer-Optik,Minolta MD,Yashica ML,Nikon,Olympus OM
DIY E-6,C41 and B&W

[Katastrofo]

Yeah, that's the one design I don't have, also called end nippers or end-cutting pliers.

Have a pair at work that are way too big.

[Attila]

mine is small ~ half inch wide
_________________
Attila - admin --- BUY FRESH FOMAPAN TO HELP KEEP THE FACTORY ALIVE ---
Foma Campaign topic - FOMAPAN on forum - Webshop EU

Items on sale on Ebay

35mm: Konica A4, Konica IIIA, Konica FC-1
MF: Konica Pearl I,II,III 6x4,5 Konica Semi Pearl
Film: Foma,Kodak, Fuji DIY development C41, FOMA LQR
Scan: Epson V500, scanassist (http://www.scanassist.org)
Shutter tester: LCD tester from member vfmoto
Digital: Panasonic G1, Sony Nex-3, Samsung NX100
Lenses: Konica Hexanons,Carl Zeiss,Carl Zeiss Jena,Meyer-Optik,Minolta MD,Yashica ML,Nikon,Olympus OM
DIY E-6,C41 and B&W

[Katastrofo]

Yeah, narrow and flush-cutting, perfect.

[Katastrofo]

One more thing, did you have to sand the ends of the spool to make it fit? That was the part
that was pissing me off, getting plastic particles in the film.

[Attila]