Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Hexanon AR 135mm f/3.2, f/3.5, disassembly
View previous topic :: View next topic  


PostPosted: Thu Jul 27, 2017 9:52 pm    Post subject: Reply with quote

sceptic wrote:
I just took my 135/3.5 apart, to know what I am talking about. It really is dead simple:
1. Unscrew the three grub screws found under the sliding hood.
2. Set the lens to its minimum focusing distance (just to make the following step easier).
3. Grab the barrel where the three screws used to be and unscrew the entire front section of the lens body; it separates from the focusing ring.
4. Voila!, the front lens group is exposed and is easily unscrewed (counter-clockwise as everything else on this lens).

You don�t need to remove the name ring nor the rubber gasket, it all comes along when you unscrew the front barrel in step 3 (I just found this out as I went along).

Hope that helps.


Thank you ! That work for me, I manage to clean this lens Like 1 small