Home

Please support mflenses.com if you need any graphic related work order it from us, click on above banner to order!

SearchSearch MemberlistMemberlist RegisterRegister ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Disassembling of S-M-C Takumar 135/2.5 V2
View previous topic :: View next topic  


PostPosted: Sun Jan 02, 2011 6:36 am    Post subject: Disassembling of S-M-C Takumar 135/2.5 V2 Reply with quote

I'm stuck and can't go further, there are two lenses remaining in the front group, I see no notches for the spanner, or something to unscrew. Can you see something ?








PostPosted: Thu Jan 06, 2011 9:52 am    Post subject: Reply with quote

Good puzzle...
No clues from my side, sorry.
Good luck!

Jes.


PostPosted: Thu Jan 06, 2011 10:03 am    Post subject: Reply with quote

Hope the thing you want to clean, as I can see, is not in the cemented part of the 1st element !!!

There might be a metallic ring glued in the front that needs heat to remove...



PostPosted: Thu Jan 06, 2011 11:31 am    Post subject: Reply with quote

The 135/2.5 V2 is a 6/6 formula, no cemented doublet in it...


PostPosted: Thu Jan 06, 2011 12:04 pm    Post subject: Reply with quote

Embarassed

This happens when you read very fast a thread .. i didn't see the v2 Rolling Eyes




It might be one of those that cannot be opened ...


PostPosted: Thu Jan 06, 2011 5:48 pm    Post subject: Reply with quote

Is it a trick of the light or is this the join line between two seperate parts?



Do they unscrew perchance?


PostPosted: Thu Jan 06, 2011 9:46 pm    Post subject: Reply with quote

Indeed, you are right, there is two different parts here Very Happy But I can't unscrew them with my hands... Confused


PostPosted: Thu Jan 06, 2011 10:18 pm    Post subject: Reply with quote

CarbonR wrote:
But I can't unscrew them with my hands... Confused


Use rubber gloves.


PostPosted: Thu Jan 06, 2011 10:42 pm    Post subject: Reply with quote

Oil filter clamps might do the trick.


PostPosted: Fri Jan 07, 2011 12:13 am    Post subject: Reply with quote

Silicone baking sheets give you terrific grip, I wrapped on around my fingertip today and spun an engraved nameplate ring out of a lens without any problem -

http://forum.mflenses.com/todays-top-tip-t35202.html

A very useful thing for the price.


PostPosted: Fri Jan 07, 2011 12:30 am    Post subject: Reply with quote

For best results, use a rubber wrench lke this one:



Regards.

Jes.


PostPosted: Fri Jan 07, 2011 1:08 am    Post subject: Reply with quote

Possibly put it back on the other piece and then try and screw it off....some of my lenses you just have to screw the top in the opposite direction and they separate easily.